Ordinary Single Switch with 17 Feet

- Nov 13, 2018 -

Ordinary Single Switch with 17 Feet

 

G8@9%)(0{[~D$TY[)1VK(YP

No. 1: Measurement of gauge\ level at the end point (10MM of the basic rail joint) along the slope

No. 2: Tip of the spire (measured on the base track from the head of the spire 10MM) measurement gauge\ level

No. 3: Measuring gauge in the middle of the spire (at the second brace)

No. 4: Measurement of gauge\ level at pointed rail heel joint (cusp heel joint)

多功能打磨机

No. 5: Measurement of gauge\ level at cusp heel (butt joint)

No. 6: Measurement of gauge\ level in front of curved rail (1.5 m from joint)

No. 7: Measurement of gauge\ level for guide rail prewarping (at 3M heel joint)

No. 8: Measurement of gauge\ level in curved rail

RAIL BOLT WRENCH


No. 9: Measurement of gauge\ level in curved rail (joint measurement)

No. 10: Measurement of gauge\ level after curved rail (4m ahead of frog)

No. 11: Measurement of track gauge\ level (at 4m ahead of frog)

No. 12: To measure the gauge\ level at the front of the frog (measured at the junction)

No. 13: In the middle of the frog (at the heart rail top width 20-30MM) measure the gauge\ check the illumination interval\ protect the distance of the back

No. 14: To measure the gauge\ level at the rear of the frog (measured at the junction)

No. 15: Measurement of track gauge\ level

No. 16: Middle bend of frog (heart track top width 20-30MM) measure gauge\ check illumination interval\ protect back distance

No. 17: To measure the gauge\ level of the frog precurve (measured at the junction)